Lesson

Dilution and Pipetting Lesson Using Food Dyes

Author(s): James Burnette1, Lisa Kanizay2, Nikki Chester3, Susan R Wessler1

1. University of California, Riverside 2. Monsanto 3. Athens Academy

Published online:

Courses: Science Process SkillsScience Process Skills

Keywords: dilution Calculation Lab Skills Micropipetting

3876 total view(s), 993 download(s)

to access supporting documents

Abstract

Resource Image

In this lesson students learn how to use micropipettors to accurately measure small volumes of liquids and perform dilutions using food dyes. Students dilute four food dyes at 10X concentration to 1X working stocks. Using the formula c1v1=c2v2 each student completes a table requiring four dilution calculations for different final volumes. Using the values they generated, students make the solutions of 1X food dye. Reference solutions furnished by the instructors provide students with immediate feedback and self-assessment. To practice adjusting the micropipette volumes, students combine their 1X solutions to produce four new colors. Comparison of these to reference solutions provides students with immediate feedback. This lesson works for students in grades 6-14 and adult learners in continuing education workshops. It requires about an hour and after they complete the lesson, students have confidence to move on to more challenging solution preparations with colorless reagents. 

Citation

Burnette, J.M., Kanizay, L., Chester, N., and Wessler, S.R. 2016. Dilution and Pipetting Lesson Using Food Dyes. CourseSource. https://doi.org/10.24918/cs.2016.5

Lesson Learning Goals

  • Students will understand the principle of diluting concentrated solutions.
  • Students will demonstrate correct micropipette use.
  • Students will know how to prepare solutions.

Lesson Learning Objectives

  • Students can use the formula c1v1=c2v2 to calculate dilutions.
  • Students can accurately set and use a micropipette.
  • Students are able to prepare complex solutions such as enzyme reactions.

Article Context

INTRODUCTION

The first day in a molecular biology laboratory can be an intimidating experience for students. In addition to discussions of biological concepts and research methodology, students must learn how to manipulate unfamiliar equipment with precision. Prior to implementing the lesson described in this report, students in our class had persistent problems calculating simple dilutions and pipetting small volumes. Their inability to perform these basic tasks from the very beginning of the course led to a high frequency of failed experiments which in turn led to losses in confidence that seriously interfered with their enjoyment of laboratory activities. In response, we developed this lesson to provide a thorough yet enjoyable introduction to the essential skills of dilution, pipetting, and the clear labeling of test tubes. Published pipetting guides were too complex for our purposes because they introduced several types of pipettors (1), were discipline specific (2), or did not include dilution exercises (3). None of the pipetting lessons we found available on the web (4) addressed the skills in context of a molecular biology laboratory or did not develop the lesson within the framework of Scientific Teaching (5). This lesson combines active laboratory work with immediate feedback. Furthermore we provide examples of common pipetting errors.

Intended Audience

The lesson was developed for use in the Dynamic Genome class at UCR by first-year undergraduates (6) and the Evolutionary Genetics course at Athens Academy by second-year high school students. Both courses are authentic research experiences in which students learn molecular biology skills including PCR, gel electrophoresis, and DNA sequence analysis. We have also used the lesson with middle and high school students during outreach programs and with high school teachers in continuing education workshops. The lesson requires about sixty minutes and can be completed in one laboratory period or it can be spread over multiple days. The lesson assumes no prior knowledge of dilutions or pipetting.

SCIENTIFIC TEACHING THEMES

The active exercise requires students to work both individually and in small groups. Instruction is divided between short discussions and completion of a written exercise or laboratory work with built-in self-checks so that errors can be corrected quickly. The lesson is inclusive of all learning abilities, as it assumes no prior knowledge of pipetting or dilution, and requires the use of math reasoning, motor skills, and self-assessment. Colorblind individuals have completed the lesson without difficulty.

LESSON PLAN

Pre-class Preparation

Reagents

We purchase generic liquid food dyes (red, blue, green and yellow) from a local grocery store and dilute the stocks 1:20 to generate "10X" solutions (Figure 1A). A pair of students is given 500 ul of each 10X dye solution in a separate 1.5 ml tube (Figure 1A) along with a 15 ml tube of water. The instructor prepares one set of reference solutions for the class in 1.5 ml tubes, using Tables 2 and 3, and places these reference on white paper labeled according to Tables 2 and 3 or in a tube rack (see Figure 1). All students complete the exercise individually. Instructors may want to include a list of common errors (see Figure 2 and 3 legends) beside the reference solutions.

Equipment

Each student is provided with a set of pipettors (P1000, P200, and P20) with a supply of tips and empty 1.5 ml tubes. We use Gilson Classic Pipettmen (Middleton, WI), but any brand of air displacement pipettors will work.

In-class Script

Performing dilution calculations

The lesson begins with a discussion of the need to dilute concentrated stock solutions to final (working) concentrations (for an overview of activity and time requirement, please see Table 1). A useful example of an everyday concentrated stock is Campbell's Condensed Soups. Most of us have prepared soup and are aware that one can of water is added to one can of soup base. Thus the condensed soup is a 2X stock. Another example is frozen orange juice where one can of concentrated juice is diluted with three cans of water and thus the stock is 4X. After using these examples, the instructor discusses a relevant concentrated laboratory solution such as 50X TAE (used for electrophoresis) or 2X Taq mix (used for PCR). The instructor shows how the formula c1v1=c2v2 is used to calculate dilutions (some students may recognize it as m1v1=m2v2). Students are then given four tubes of 10X food dyes (i.e. a concentrated stock solution) and instructed to dilute each to 1X final concentration. Students use Table 2 to calculate the volumes of 10X dye and water required to make 1X solutions of differing final volume. The volumes were chosen to require the students to use the P1000, P200 and P20 pipettes at various volume settings. After the discussion of dilutions, students are instructed about the importance of clearly labeling test tubes and are asked to label four with their initials, the specific dye color, and the final concentration.

Using a pipettor to make solutions

Instructors first demonstrate the proper use of the different pipettors and then each student prepares the four dilutions. For a detailed description of pipettor usage see Miller et al (3). Students can also view a video that demonstrates the proper use of a pipettor (7). Students receive immediate feedback when they compare their results to the reference solutions provided by the instructor (Figure 1B and C). Examples of errors are shown in Figure 1C. Once the1X dyes are made, students can photograph their results with a cell phone or tablet computer for inclusion in the lab notebook. An electronic laboratory notebook, e-LN, is used in the Dynamic Genome course (8, http://dgenotebook.ucr.edu/notebooks/public/2015/03/25/example-dilution-and-pipetting/). If students make errors they can photograph the tubes and comment on what they did wrong. They then repeat the dilution to correct any mistakes until each student has one correct dilution for each of the four colors.

After preparation of the 1X solutions, students label four new tubes and mix the 1X solution according to Table 3. If they have successfully pipetted the correct solutions in the correct amounts, the students will generate orange, purple, cyan, and olive colors (Figure 2A). To evaluate pipetting skills, they again compare their results with the reference set. Small errors in pipetting will result in color variations (Figure 2B) and small volume differences are easy to spot due to the dye. Again the results are photographed for inclusion in a notebook. Students can comment in the notebook entry about any mistakes they made before trying again. Students are given time to repeat any step until they get it right.

TEACHING DISCUSSION

Inclusion of this lesson in our Dynamic Genome course (Burnette and Wessler 2013) and the Evolutionary Genetics course at Athens Academy resulted in an increase in the success rate of the first PCR experiment. The visual feedback from the food dyes grabs the student attention and provides immediate feedback, so there is time to correct errors if necessary. Students especially enjoyed using their personal electronic devices to photograph the tubes and many even shared them on social media. In addition, many students ask if they can take the dyes home to show family and friends. The lesson is inexpensive and safe because it uses only food dyes and water. The four dye set cost less than $5 and will serve at least 500 students.

In addition to the college course, we have successfully used this lesson in outreach workshops for middle and high school students. Hundreds of students have used this lesson before moving on to molecular biology experiments that require precision pipetting skills. Middle and high school teachers who participated appreciated the combination of math and biology skills and several have included the module in their curriculum.

Extension and Adaptations

If time permits a fun extension of the lesson is shown in Figure 3 and gives student more practice with the pipettors to further hone their skills before moving on to mixing enzyme reactions. Groups of students are provided with a 96-well plate and they generate a picture of their own design by filling the wells using all of the available dyes (10X, 1X, and new colors) or use a prescribed template (4). Completed plates can be photographed with cell phones and shared on social media and plates can be washed and re-used. Other extensions could include a discussion of pipetting precision and accuracy using the procedure included in the Gilson Guide to Pipetting (9).

SUPPORTING MATERIALS

S1. Dilution Pipetting-Student Handout

ACKNOWLEDGMENTS

We thank all of the students who have provided feedback and Judith St. John at the University of Denver along with Amanda Latimer at Athens Technical College for inspiration. We also thank Hailey Choi for the cover photograph idea. The development and ongoing use of the pipetting exercise is funded by grants from the Howard Hughes Medical Institute (52005731,52008110), National Science Foundation (DUE-1317642), and United States Department of Agriculture (2013-38422-20955) to S.R.W.

References

  1. Guzman, K. (2001). Pipetting: A Practical Guide. American Biology Teacher, 63(2):128-131.
  2. Moni, RW, Hryciw, P, Poronnik, P, Lluka, LJ, and Moni, KB (2007). Assessing core manipulative skills in a large, first-year laboratory. Advances in Physiology Education 31(3): 266-269.
  3. Miller, J., Sass, ME, Wong, SJ, and Nienhuis, J. (2004). Micropipetting: an important laboratory skill of molecular biology. The American Biology Teacher, 66(4):291-296.
  4. Web resources (a few examples): Pipetting by design: http://www.cpet.ufl.edu/wp-content/uploads/2012/10/Pipetting-by-Design-lesson-plan-6_2012.pdf, Micropipette technique using food coloring: Google Cache, Lab 1. Basic skills: dilutions, micropipettes: bio.classes.ucsc.edu/bio20L/MANUAL/Lab%201.pdf. Last accessed on Sept. 15, 2015.
  5. Handelsman, J; Miller, S; Pfund, C. 2007. Scientific Teaching. Macmillan Education.
  6. Burnette JM, Wessler SR. 2013. Transposing from the laboratory to the classroom to generate authentic research experiences for undergraduates. Genetics 193:367-375.
  7. Using a micropipette. Bio-Rad. http://www.bio-rad.com/webroot/web/html/lse/support/tutorial_transferpipet_wndw.html. Last Accessed on Feb. 1, 2016
  8. Robb, S., Burnette III, J.M., Chapovskya, A., Palmer, K. and Wessler, S.R. 2015. An Open Source, Collaborative Electronic Notebook for Undergraduate Laboratory Classes. CourceSource. http://coursesource.org/courses/an-open-source-collaborative-electronic-notebook-for-undergraduate-laboratory-classes
  9. Gilson Guide to Pipetting, 3(rd) edition. http://www.gilson.com/ggp#.Vq5xyMfB_8s. Last accessed on Jan. 31, 2016.

Article Files

to access supporting documents

Authors

Author(s): James Burnette1, Lisa Kanizay2, Nikki Chester3, Susan R Wessler1

1. University of California, Riverside 2. Monsanto 3. Athens Academy

Competing Interests

Howard Hughes Medical Institute Professors Grant (52005731) and HHMI Institutional Grant (52008110), National Science Foundation (DUE-1317642) and United States Department of Agriculture (2013-38422-20955) to S.R.W. No conflicts of interest.

Comments

Comments

There are no comments on this resource.